Clover CDR-0850 Instruction Manual Download

Page: 84 / 162

Stand-alone DVR

Instruction Manual

7-2.5. FIRMWARE UPDATE

There are two ways to update the firmware through

USB memory

and the

SmViewer

(GUI).

We recommend users to update the firmware only in the LIVE mode.

▫

By USB memory

Format the USB with your computer and save the firmware file on it (not including

folder).

Plug it on the USB port on the DVR.

Click the mouse on the SELECT button in the SYSTEM menu and the FIRMWARE

LIST will be displayed.

Click on the list, and then You will be asked, OK or CANCEL.

Click the OK button to update the firmware and the system will automatically start to

reboot.

Click the CANCEL button to cancel.

▫

By SmViewer (GUI)

Refer to section 8-4.1

④

Firmware Update on

page136.

7-2.6. SYSTEM INFO

▫

Click the “SYSTEM INFO” button in the SYSTEM menu and the SYSTEM INFO that

contains the system version and the last updated date will be displayed.

▫

Click the

(EXIT) button to return to the SETUP menu.

[Fig.7-21 SYSTEM INFORMATION window]

Summary of Contents for CDR-0850


































































































































































Search results

Summary of Contents for CDR-0850

Reviews:

Related manuals for CDR-0850

Brands by name

Popular brands

Clover CDR-0850, Instruction Manual

Search results

Summary of Contents for CDR-0850

Reviews:

Related manuals for CDR-0850

Brands by name

Popular brands