manualshive.com logo in svg

Clover CDR-0850, Instruction Manual, Page: 12 / 162

Share
Download
Clover CDR-0850 Instruction Manual Download Page 12

Stand-alone DVR

 Instruction Manual

 

 

 

 

Stand-alone DVR (Digital Video Recorder) Unit   

 

CDR0850

 is the most reliable and functional embedded DVR system available today. The system 

displays 8 channels of live images in Real Time speed, compresses data digitally and records 

them to the Hard Disk Drive, which can be replayed and searched easily any time.   

The

 CDR0850

 supports easy back up via USB port, DVD R/W, CD R/W and networking in both 

static & dynamic IP modes. 

User can remotely view live images or search the recorded images.   

Under emergency situation, the remote operator can control, turn on and turn off the field 

installed alarms, such as a siren or light. 

It is a very user- friendly DVR system. User can control the 

CDR0850

 by Mouse or Buttons on 

the front panel or Remote controller.   

 

 

 

 

 

 

 

 

 

12

Summary of Contents for CDR-0850



































































































































































Reviews:

No comments