Cleveland SteamCraft V, Service Manual

Page: 53 / 96

CET-16 Service Manual Page 51
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE REMEDY/REFERENCE
POWER touch pad on, but panel
light does not turn on. Electricity turned off. Turn on on electricity.
WATER alarm light on. Steamer
does not make any steam. Normally on during
FILLING
.
Water supply to steam generator
is turned off. Open water supply valve.
Water line filter is dogged.
Clea
n
out water supply filter-
Drain valve is open. Close drain valve.
Inoperative controls. See note #1.
FLOOD alarm light on. (Steamer
controls do not work.) WARNING: Do NOT open door.
Steamer flooded; drain closed
.
Open drain.
Drain clogged inside
steamer
See note #2.
False alarm by water splashing
on flood probe. Water pressure
too high. Restart per note #3.
Unit may need new flood probe
retrofit kit. Contact service representative.
Water solenoid or controls
inoperative. Turn electricity and water off and
refer to note #1.
Steam coming from drain hub. Water supply to condenser
turned off
Open water supply valve.
Water line strainer is clogged
.
Clea
n
oat water supply strainer.
Water supply lin
e
to the can-
denser blocked, broken, or
leaking.
Repair or replace water supply line
See note #1.
Inoperative condenser solenoid. Replace solenoid. See note #1 .
Inoperative controls. Turn off electricity. See note #1.
Steam and/or water draining around
cabinet door. Drain clogged or covered.
Clea
n
drain with USDA approved
drain cleaner.
Door seal or door parts worn. See note #1.
Steamer not level. See note #6.
Steam flow does not stop when timer
reads 00, or fan and heaters stay on
when cabinet door is open. Inoperative controls inside
cabinet. Turn off electricity. See note #1.
Printed 4/90