Installing the UC 320W and Phones
Verifying Phone Startup
Unified Communications UC 320W Administration Guide
40
1
Verifying Phone Startup
After receiving power and network connectivity, the phone executes a boot-up
sequence. During this sequence, phones with screens display the Cisco logo and
then “Initializing Network.” All of the lights on the phone will flash.
After your phone is successfully connected to the network, it receives a basic
configuration. On all models except Cisco SPA 501G, the time, date, extension
number, and softkeys appear on the display screen. On Cisco SPA 501G, which
has no display screen, you should hear a dial tone when picking up the handset or
pressing the speakerphone button.
If the phone does not start, confirm your installation and connections. If these are
correct, try unplugging the phone and plugging it back in again.
Upgrading the Phone Firmware
Use the 320W Configuration Utility to upgrade the firmware for all components of
the Unified Communications system.
