Smart Network Application (SNA)
Operations
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
669
29
Explorers
Explorers enable additional information to be displayed for SNA-capable switches,
connections and client groups.
NOTE
To enter an explorer, click on the note representing the device or on a connection. The
information displayed by the explorer may change according to the overlay selected (see
).
The following explorers exist:
•
•
•
Device Explorer
This explorer provides additional information on full SNA devices and their interfaces.
It displays a table view of the ports and existing LAGs in the switch. Every entry in the table
has several basic columns, and a small number of additional columns that appear only when
the relevant overlay is active:
The following columns are displayed in the Device Explorer table:
•
Port/LAG Name
— Full interface name.
•
Unit ID
— Displays only in the port table and for stacked switches.
•
Port Type
— Displays only in the port table. Physical type of the port.
•
Admin Status
— The interface’s administrative status.
•
Operational Status
— The interface’s operational state. If the interface is
suspended, the suspension reason appears in parenthesis.
•
LAG Membership
— Displays only in the port table. If the port is a member of a
LAG, this column shows the LAG ID.
•
Port Members
— Displays only in the LAG table. Displays a list of the ports that
are members in this LAG. This field may contain a long list of ports. If the complete
list does not fit in the table, it may be viewed on the right-hand information.
•
Description
— Description of the interface. Uses the MIB ifAlias.
•
When the
Link Utilization
overlay is selected, the following columns are displayed:
-
Current Speed
— Current speed of the interface (10M, 100M, 1G…).
