manualshive.com logo in svg

Cisco SF550X-24, Administration Manual

The Cisco SF550X-24 is a versatile networking switch designed for efficient administration and high-performance connectivity. For a comprehensive understanding of its functionalities, the Administration Manual is available for download, free of cost, exclusively at manualshive.com. Unlock the full potential of this product with the detailed step-by-step instructions provided in the manual.

Share
Download
background image

Administration: Discovery

Discover - LLDP

121

Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x

8

-

Endpoint Class 3

—Communications device class, offering all Class 1 and Class 2 

features plus location, 911, Layer 2 device support, and device information 
management capabilities.

•

PoE Device Type

—Port PoE type; for example, PD.

•

PoE Power Source

—Port power source.

•

PoE Power Priority

—Port power priority.

•

PoE Power Value

—Port power value.

•

Hardware Revision

—Hardware version.

•

Firmware Revision

—Firmware version.

•

Software Revision

—Software version.

•

Serial Number

—Device serial number.

•

Manufacturer Name

—Device manufacturer name.

•

Model Name

—Device model name.

•

Asset ID

—Asset ID.

Location Information

•

Civic

—Street address.

•

Coordinates

—Map coordinates: latitude, longitude, and altitude.

•

ECS ELIN

—Emergency Call Service (ECS) Emergency Location Identification 

Number (ELIN). 

Network Policy Table

•

Application Type

—Network policy application type; for example, Voice.

•

VLAN ID

—VLAN ID for which the network policy is defined.

•

VLAN Type

—VLAN type for which the network policy is defined. The possible field 

values are:

-

Tagged

—Indicates the network policy is defined for tagged VLANs.

-

Untagged

—Indicates the network policy is defined for untagged VLANs.

•

User Priority

—Network policy user priority.

•

DSCP

—Network policy DSCP.

Summary of Contents for SF550X-24






















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SF550X-24

UNICOM FEP-31024T-3 Specifications preview
FEP-31024T-3
Brand: UNICOM Pages: 1
AMX AVS-OP-1616-340 Product View preview
AVS-OP-1616-340
Brand: AMX Pages: 1
INFLUX MEASUREMENTS SPDB 30 Manual To The Installation, Operation & Maintenance preview
SPDB 30
Brand: INFLUX MEASUREMENTS Pages: 6
Zektor HDA800 User Manual preview
HDA800
Brand: Zektor Pages: 65
socomec ATyS p M Instruction Manual preview
ATyS p M
Brand: socomec Pages: 78
Omron D4N-1A20R Datasheet preview
D4N-1A20R
Brand: Omron Pages: 16
DeLOCK 87699 User Manual preview
87699
Brand: DeLOCK Pages: 8
Network Technologies SE-DVI-2 Installation And Operation Manual preview
SE-DVI-2
Brand: Network Technologies Pages: 7
Maipu S12800 Installation Manual preview
S12800
Brand: Maipu Pages: 135
I-Tech NPXW117 User Manual preview
NPXW117
Brand: I-Tech Pages: 19
Linkskey LDV-DM702AUSK Quick Installation Manual preview
LDV-DM702AUSK
Brand: Linkskey Pages: 2
Synergy Global Technology LCDK1023 User Manual preview
LCDK1023
Brand: Synergy Global Technology Pages: 9
Duxbury Networking N.JGS516PE-100EUS Installation Manual preview
N.JGS516PE-100EUS
Brand: Duxbury Networking Pages: 4
Intellinet 560641 Instructions Manual preview
560641
Brand: Intellinet Pages: 12
AMX AVS-OP-2416-340 Specifications preview
AVS-OP-2416-340
Brand: AMX Pages: 1
Fore Systems forerunner series Configuration Manual preview
forerunner series
Brand: Fore Systems Pages: 352
Omega PSW20 Series Instruction Sheet preview
PSW20 Series
Brand: Omega Pages: 4
GarrettCom Magnum Quad-Series Installation And User Manual preview
Magnum Quad-Series
Brand: GarrettCom Pages: 55

Brands by name

Popular brands

Load more brands