IP Configuration
IPv6 Management and Interfaces
305
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
15
•
Sequence Number
—Specifies the place of the prefix within the prefix list. Select one
of the following options:
-
Auto Numbering
—Puts the new IPV6 prefix after the last entry of the prefix list. The
sequence number equals the last sequence number plus 5. If the list is empty the first
prefix-list entry is assigned the number 5 and subsequent prefix list entries
increment by 5.
-
User Defined
—Puts the new IPV6 prefix into the place specified by the parameter.
If an entry with the number exists, it is replaced by the new one.
•
Rule Type
—Enter the rule for the prefix list:
-
Permit
—Permits networks that matches the condition.
-
Deny
—Denies networks that matches the condition.
-
Description
—Text.
•
IPv6 Prefix
—IP route prefix.
•
Prefix Length
—IP route prefix length.
•
Greater Than
—Minimum prefix length to be used for matching. Select one of the
following options:
-
No Limit
—No minimum prefix length to be used for matching.
-
User Defined
—Minimum prefix length to be matched.
•
Lower Than
—Maximum prefix length to be used for matching. Select one of the
following options:
-
No Limit
—No maximum prefix length to be used for matching.
-
User Defined
—Maximum prefix length to be matched.
•
Description
—Enter a description of the prefix list.
STEP 4
Click
Apply
to save the configuration to the Running Configuration file.
IPv6 Access Lists
The IPv6 access list can be used in MLD Proxy > Global MLD Proxy Settings > SSM IPv6
Access List page.
To create an access list:
