IP Configuration
Policy-Based Routing
311
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
15
Route Map Binding
All packets coming in on an interface that is bound to a route map and match a route map rule
are routed to the next hop defined in the rule.
To bind an interface to a route map:
STEP 1
Click
IP Configuration
>
Policy Based Routing
>
Route Map Binding
.
STEP 2
Click
Add
and enter the parameters:
•
Interface
—Select an interface (with an ip address).
•
Bound IPv4 Route Map
—Select an IPv4 route map to bind to the interface.
•
Bound IPv6 Route Map
—Select an IPv6 route map to bind to the interface.
STEP 3
Click
Apply
. The Running Configuration file is updated.
Policy-Based Routes
To view the route maps that defined:
STEP 1
Click
IP Configuration
>
Policy Based Routing
>
Policy Based Routes
.
STEP 2
Previously-defined route maps are displayed:
•
Interface Name
—Interface on which route map is bound.
•
Route Map Name
—Name of route map.
•
Route Map Status
—Status of interface:
-
Active
—Interface is up.
-
Interface Down
—Interface is down.
•
ACL Name
—ACL associated with route map.
•
Next Hop
—Where packets matching route map will be routed.
•
Next Hop Status
—Reachability of next hop:
-
Active
—The next hop IP address is reachable.
-
Unreachable
—The status is not active due to the fact that the next hop IP address is
not reachable.
