manualshive.com logo in svg

Cisco SF550X-24, Administration Manual

The Cisco SF550X-24 is a versatile networking switch designed for efficient administration and high-performance connectivity. For a comprehensive understanding of its functionalities, the Administration Manual is available for download, free of cost, exclusively at manualshive.com. Unlock the full potential of this product with the detailed step-by-step instructions provided in the manual.

Share
Download
background image

Security: Secure Sensitive Data Management

Configuring SSD

333

Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x

18

To configure global SSD properties:

STEP 1

Click 

Security

 > 

Secure Sensitive Data Management 

> 

Properties

. 

The following field appears:

•

Current Local Passphrase Type

—Displays whether the default passphrase or a user-

defined passphrase is currently being used.

STEP  2

Enter the following 

Persistent Settings

 fields:

•

Configuration File Passphrase Control

—Select an option as described in 

Configuration File Passphrase Control

.

•

Configuration File Integrity Control

—Select to enable this feature. See 

Configuration File Integrity Control

.

STEP  3

Select a Read Mode for the current session (see 

Elements of an SSD Rule

).

STEP  4

Click 

Apply

. The settings are saved to the Running Configuration file.

To change the local passphrase:

STEP 1

Click 

Change Local Passphrase

, and enter a new 

Local Passphrase

:

•

Default

—Use the devices default passphrase.

•

User Defined (Plaintext)

—Enter a new passphrase.

•

Confirm Passphrase

—Confirm the new passphrase.

STEP  2

Click 

Apply

. The settings are saved to the Running Configuration file.

SSD Rules Configuration

Only users with SSD read permission of Plaintext-only or Both are allowed to set SSD rules.

Summary of Contents for SF550X-24






















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SF550X-24

S&C 2000 series Instructions For Field Assembly And Installation preview
2000 series
Brand: S&C Pages: 26
S&C 2000 series Installation And Operation Manual preview
2000 series
Brand: S&C Pages: 37
S&C 2000 series Installation Manual preview
2000 series
Brand: S&C Pages: 28
La Toulousaine 1400 Installation Manual preview
1400
Brand: La Toulousaine Pages: 6
D-Link DGS-1224TP - Web Smart Switch User Manual preview
DGS-1224TP - Web Smart Switch
Brand: D-Link Pages: 52
D-Link DGS-1008P Quick Install Manual preview
DGS-1008P
Brand: D-Link Pages: 8
D-Link DES-3225G Series Technical Bulletin preview
DES-3225G Series
Brand: D-Link Pages: 3
D-Link DES-1228 - Web Smart Switch Manual preview
DES-1228 - Web Smart Switch
Brand: D-Link Pages: 69
D-Link DGS-1210-10P Reference Manual preview
DGS-1210-10P
Brand: D-Link Pages: 109
Barco DCS-100 Specifications preview
DCS-100
Brand: Barco Pages: 2
E-Trailer E-Switch Product Manual preview
E-Switch
Brand: E-Trailer Pages: 8
B&K HD6 Product Manual preview
HD6
Brand: B&K Pages: 2
B&B Electronics 232BSS4 Manual preview
232BSS4
Brand: B&B Electronics Pages: 45
Kathrein EXR 221 Quick Start Manual preview
EXR 221
Brand: Kathrein Pages: 8
Nayar Systems Switch Manual preview
Switch
Brand: Nayar Systems Pages: 21
Kathrein EXD 1532 User Manual preview
EXD 1532
Brand: Kathrein Pages: 24
Kasia Switch Installation Manual preview
Switch
Brand: Kasia Pages: 5
Eaton TRIPP LITE Series Quick Start Manual preview
TRIPP LITE Series
Brand: Eaton Pages: 8

Brands by name

Popular brands

Load more brands