Getting Started
Starting the Web-based Configuration Utility
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
10
1
To log in to the device configuration utility:
STEP 1
Enter the username/password. The password can contain up to 64 ASCII characters.
Password-complexity rules are described in
STEP 2
If you are not using English, select the desired language from the Language drop-down menu.
To add a new language to the device or update a current one, see the description of the
Language Menu described in
.
STEP 3
If this is the first time that you logged on with the default user ID (
cisco
) and the default
password (
cisco
) or your password has expired, the Change Password Page appears. See
for additional information.
STEP 4
Choose whether to select
Password Complexity Settings
in the
page.
STEP 5
Enter the new password and click
Apply
.
When the login attempt is successful, the Getting Started page appears.
If you entered an incorrect username or password, an error message appears and the Login
page remains displayed on the window.
Select
Don't show this page on startup
to prevent the Getting Started page from being
displayed each time that you log on to the system. If you select this option, the
page is opened instead of the Getting Started page.
HTTP/HTTPS
You can either open an HTTP session (not secured) by clicking
Log In
, or you can open an
HTTPS (secured) session, by clicking
Secure Browsing (HTTPS)
. You are asked to approve
the logon with a default RSA key, and an HTTPS session is opened.
NOTE
There is no need to input the username/password prior to clicking the
Secure Browsing
(HTTPS)
button
.
For information on how to configure HTTPS, see
Password Expiration
The New Password page is displayed in the following cases:
•
The first time that you access the device with the default username
cisco
and password
cisco
. This page forces you to replace the factory default password.
