Cisco ONS 15454 Series, Procedure Manual

Page: 25 / 850

T A B L E S
xxv
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
Table 1 Cisco ONS 15454 Procedure Guide Chapters
xlvii
Table 1-1 Pin Assignments for the AEP
1-15
Table 1-2 Alarm Input Pin Assignments
1-17
Table 1-3 Alarm Output Pin Assignments
1-18
Table 1-4 Standoffs Required for EIA Types
1-23
Table 1-5 Shelf Installation Task Summary
1-30
Table 2-1 Card and Slot Compatibility for the XCVT Card
2-3
Table 2-2 Card and Slot Compatibility for the XC10G Card
2-5
Table 2-3 OC-N Card Transmit and Receive Levels
2-15
Table 3-1 CTC Computer Setup for Local Craft Connections to the ONS 15454
3-3
Table 4-1 Protection Types
4-10
Table 6-1 ONS 15454 Circuit Options
6-3
Table 6-2 CTC Circuit Source and Destination Options for VT Circuits
6-3
Table 6-3 CTC Circuit Source and Destination Options for STS Circuits
6-4
Table 11-1 Cisco ONS 15454 Card State Transitions
11-6
Table 15-1 Audit Trail Column Definitions
15-10
Table 15-2 ONS 15454 Timing Report
15-19
Table 15-3 Incompatibility Alarms
15-23
Table 17-1 External Timing Pin Assignments for BITS
17-25
Table 17-2 LAN Pin Assignments
17-26
Table 17-3 Craft Interface Pin Assignments
17-27
Table 17-4 Pin Assignments for AMP Champ Connectors
17-30
Table 17-5 Pin Assignments for AMP Champ Connectors (Shielded DS1 Cable)
17-31
Table 18-1 OC- N Cards that Terminate the Line, Called LTEs
18-7
Table 18-2 Managing Domains
18-20
Table 18-3 Line Options for DS1-14 and DS1N-14 Cards
18-29
Table 18-4 Line Thresholds Options for DS1-14 and DS1N-14 Cards
18-30
Table 18-5 Electrical Path Threshold Options for DS1-14 and DS1N-14 Cards
18-31
Table 18-6 SONET Threshold Options for DS1-14 and DS1N-14 Cards
18-31
Table 18-7 Line Options for DS3-12 or DS3N-12 Cards
18-33
Table 18-8 Line Threshold Options for DS3-12 or DS3N-12 Cards
18-34