manualshive.com logo in svg

Cisco CRS-1 - Carrier Routing System Router, Administration Manual

Introducing the Cisco CRS-1 - a cutting-edge Carrier Routing System Router built to elevate your network performance. Seamlessly manage and customize your device with the comprehensive Configuration Manual, available for free download from manualshive.com. Enhance your user experience with this exceptional product, designed to empower your network capabilities.

Share
Download
background image

 

Chapter 3      Provisioning Telephony and Media

Provisioning ASR and TTS in Cisco CRS

3-26

Cisco Customer Response Solutions Administration Guide, Release 4.1(1)

Step 5

Click Add to apply changes. 

Your changes appear in the MRCP ASR Server list web page. You are now ready 
to provision MRCP ASR Groups.

Provisioning MRCP ASR Groups

Use the MRCP Groups Configuration web page to specify information about 
MRCP ASR dialog control groups, which enable CRS applications to use speech 
recognition.

Note

You must have a MRCP ASR Provider defined before you can provision a MRCP 
ASR Group. Also, you should configure MRCP ASR Servers for the specific 
MRCP Provider before configuring the MRCP ASR Groups. This allows users to 
configure languages for the groups based on the languages supported by the 
configured servers.

Procedure

Step 1

From the CRS Administration menu bar, choose Subsystem > MRCP ASR.

The MRCP ASR Providers list web page opens, displaying the MRCP Providers 
area. 

Step 2

Click the MRCP ASR Dialog Groups hyperlink.

The MRCP ASR Dialog Group Configuration web page opens. 

Note

For a complete description of all columns, icons, and buttons on this page, 
see 

“MRCP ASR Dialog Group Configuration”

 in 

Chapter 15, “The 

Subsystems Menu.”

Step 3

Click the Add MRCP ASR Dialog Control Group hyperlink.

The MRCP ASR Dialog Group Configuration web page opens. 

Summary of Contents for CRS-1 - Carrier Routing System Router





















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CRS-1 - Carrier Routing System Router

Rosewill RSV-Z2700 User Manual preview
RSV-Z2700
Brand: Rosewill Pages: 8
Enterasys 5C105 MATRIX E5 Overview And Setup Manual preview
5C105 MATRIX E5
Brand: Enterasys Pages: 40
Brocade Communications Systems FastIron SX Hardware Installation Manual preview
FastIron SX
Brand: Brocade Communications Systems Pages: 182
Supero SC503 Series User Manual preview
SC503 Series
Brand: Supero Pages: 38
Supero SC503-200B User Manual preview
SC503-200B
Brand: Supero Pages: 42
Supero SC101i User Manual preview
SC101i
Brand: Supero Pages: 46
National Instruments NI PXI-1050 User Manual preview
NI PXI-1050
Brand: National Instruments Pages: 60
TCL L28B2500-MS306D-LA Service Manual preview
L28B2500-MS306D-LA
Brand: TCL Pages: 39
NI PXI Express PXIe-1082 User Manual preview
PXI Express PXIe-1082
Brand: NI Pages: 67
Sharkoon Night Shark RGB Manual preview
Night Shark RGB
Brand: Sharkoon Pages: 10
Nortel Passport 8003 Specifications preview
Passport 8003
Brand: Nortel Pages: 8
Nortel 8010co Installation Manual preview
8010co
Brand: Nortel Pages: 82
Nortel Passport 8000 Series Installing And Maintaining preview
Passport 8000 Series
Brand: Nortel Pages: 120

Brands by name

Popular brands

Load more brands