Cisco CRS-1 - Carrier Routing System Router Administration Manual Download Page 137

Page: 137 / 436

C H A P T E R

5-1

Cisco Customer Response Solutions Administration Guide, Release 4.1(1)

Provisioning Additional Subsystems

To provision additional subsystems, you must complete the following tasks:

•

Log into the CRS Administration (see the

Accessing the CRS Administration

Web Interface, page 2-2

•

Provision your telephony and media resources (see the

“About CRS

Telephony and Media” section on page 3-2

•

Provision your Unified CCX subsystem, if required (see the

“About Unified

CCX” section on page 4-2

)

The following sections introduce the additional Cisco CRS subsystems and
explain how to provision them.

•

About Additional Subsystems, page 5-2

•

Provisioning the Unified ICME Subsystem, page 5-3

•

Provisioning the HTTP Subsystem, page 5-8

•

Provisioning the Database Subsystem, page 5-12

•

Provisioning the eMail Subsystem, page 5-16

Summary of Contents for CRS-1 - Carrier Routing System Router





















































































































































































































































































































































































































































Search results

Summary of Contents for CRS-1 - Carrier Routing System Router

Reviews:

Cisco CRS-1 - Carrier Routing System Router, Administration Manual, Page: 137 / 436

Search results

Summary of Contents for CRS-1 - Carrier Routing System Router

Reviews: