manualshive.com logo in svg

Cisco CRS-1 - Carrier Routing System Router, Administration Manual

Introducing the Cisco CRS-1 - a cutting-edge Carrier Routing System Router built to elevate your network performance. Seamlessly manage and customize your device with the comprehensive Configuration Manual, available for free download from manualshive.com. Enhance your user experience with this exceptional product, designed to empower your network capabilities.

Share
Download
background image

 

Chapter 4      Provisioning Cisco Unified CCX

Configuring Agent-Based Routing

4-38

Cisco Customer Response Solutions Administration Guide, Release 4.1(1)

The Remote Monitor area of the Unified CCX Configuration web page reappears.

The Supervisor is now able to access the CRS Supervision web page and view 
his/her allowed CSQs and agents.

Tip

When running the Remote Monitoring script, you might need to provide a CSQ 
ID. This ID is internally generated and is only visible on the CRS Supervision 
page. See the 

“Viewing CSQ IDs for Remote Monitoring” section on page 12-3

Configuring Agent-Based Routing

Agent-based routing provides the ability to send a call to a specific agent, rather 
than any agent available in a CSQ. 

Use the Agent Based Routing Settings web page to configure system-wide 
parameters to be used in an agent-based routing application.

Procedure

Step 1

From the CRS Administration menu bar, choose Subsystems > RmCm.

The Unified CCX Configuration web page opens, displaying the RM JTAPI 
Provider area.

Step 2

On the Unified CCX Configuration navigation bar, click the Agent Based 
Routing Settings hyperlink.

The agent-based routing area opens. 

Step 3

Use this web page to specify the following: 

Summary of Contents for CRS-1 - Carrier Routing System Router





















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CRS-1 - Carrier Routing System Router

Pitney Bowes Epic v3.1 Operator'S Manual preview
Epic v3.1
Brand: Pitney Bowes Pages: 336
Supermicro SC836A-R1200B User Manual preview
SC836A-R1200B
Brand: Supermicro Pages: 146
Philips AH 673 - alignment Manual preview
AH 673 - alignment
Brand: Philips Pages: 3
Philips G90AE Schematic Diagrams preview
G90AE
Brand: Philips Pages: 15
Philips FL9.1 Technical Training Manual preview
FL9.1
Brand: Philips Pages: 34
Philips L01.1L AC Service Manual preview
L01.1L AC
Brand: Philips Pages: 43
Philips 55PUL7472/F7 User Manual preview
55PUL7472/F7
Brand: Philips Pages: 43
Philips L01.2E AB Service Manual preview
L01.2E AB
Brand: Philips Pages: 60
Philips EM1A Servise Manual preview
EM1A
Brand: Philips Pages: 54
Philips B8 Series Service Manual preview
B8 Series
Brand: Philips Pages: 58
Philips 55PUL7472/F7 Service Manual preview
55PUL7472/F7
Brand: Philips Pages: 60
Philips EM5.2E Service Manual preview
EM5.2E
Brand: Philips Pages: 80
Philips L01.1A Service Manual preview
L01.1A
Brand: Philips Pages: 88
Philips F21RE Service Manual preview
F21RE
Brand: Philips Pages: 114
Philips DPTV565 AA Service Manual preview
DPTV565 AA
Brand: Philips Pages: 119
Philips FTP1.1E Service Manual preview
FTP1.1E
Brand: Philips Pages: 127
Philips EM5A NTSC Service Manual preview
EM5A NTSC
Brand: Philips Pages: 153
Philips EM6E Service Manual preview
EM6E
Brand: Philips Pages: 154

Brands by name

Popular brands

Load more brands