Chevrolet 2011 Corvette Owner'S Manual Download Page 82 | Manualshive

Page: 82 / 436

Chevrolet 2011 Corvette Owner'S Manual Download Page 82

Black plate (16,1)

Chevrolet Corvette Owner Manual - 2011

3-16

Seats and Restraints

Q: What is wrong with this?

A:

The belt is over an armrest.

{

WARNING

You can be seriously injured if the
belt goes over an armrest like
this. The belt would be much too
high. In a crash, you can slide
under the belt. The belt force
would then be applied on the
abdomen, not on the pelvic
bones, and that could cause
serious or fatal injuries. Be sure
the belt goes under the armrests.

Q: What is wrong with this?

A:

The shoulder belt is worn under
the arm. It should be worn over
the shoulder at all times.

«
...
80
81
82
83
84
...
»

Summary of Contents for 2011 Corvette





















































































































































































































































































































































































































































Reviews:

No comments