Chevrolet 2011 Corvette Owner'S Manual Download Page 53 | Manualshive

Page: 53 / 436

Chevrolet 2011 Corvette Owner'S Manual Download Page 53

Black plate (21,1)

Chevrolet Corvette Owner Manual - 2011

Keys, Doors and Windows

2-21

7. To unlock the rear of the roof

panel's rear release latch,
press the back of the release
handle (B). Then press the
button on the front of the release
handle (A).

Pull down the latch lever.

8. Stand on one side of the

vehicle, and if necessary, have
someone stand on the other
side. Together, carefully lift the
front edge of the roof panel up
and forward.

9. When the roof panel is loosened

from the vehicle, one person
should grasp the roof panel as
close to the center as possible
and lift it away from the vehicle.

Storing the Roof Panel

{

WARNING

If a roof panel is not stored
properly, it could be thrown about
the vehicle in a crash or sudden
maneuver. People in the vehicle
could be injured. Whenever you
store a roof panel in the vehicle,
always be sure that it is stored
securely in the proper location.

Notice:

If you drop or rest a roof

panel on its edges, the roof panel,
paint and/or weatherstripping
may be damaged. Always place
the roof panel in the stowage
receivers after removing it from
the vehicle.

1. Turn the roof panel so that the

front edge of the panel is facing
the storage area.

2. Insert the roof panel so that

the outside front edges line up
between the receiver covers.
Push forward on the roof panel
until it stops.

«
...
51
52
53
54
55
...
»

Summary of Contents for 2011 Corvette





















































































































































































































































































































































































































































Reviews:

No comments