Chevrolet 2011 Corvette Owner'S Manual Download Page 12

Page: 12 / 436

Black plate (6,1)

Chevrolet Corvette Owner Manual - 2011

1-6

In Brief

Trunk Release

Opening and Closing the
Hatch/Trunk

There are three ways to open the
hatch/trunk:

Touch the button located above
the license plate. The keyless
access transmitter must be
within three feet of the button.

Press

located to the left of

the steering wheel.

Press

}

on the keyless

access transmitter.

For more information, see

Hatch on

page 2

‑

Windows

The power window switches are
located on each door.

Pull up or press down on the front
of the switch to raise or lower the
window.

For more information, see

Power

Windows on page 2

‑

Seat Adjustment

Manual Seats

To adjust a manual seat:

1. Lift the bar under the front of the

seat cushion to unlock the seat.

2. Slide the seat to the desired

position and release the bar.

3. Try to move the seat back and

forth to make sure it is locked in
place.

See

Seat Adjustment on page 3

‑

for more information.

Summary of Contents for 2011 Corvette





















































































































































































































































































































































































































































Search results

Summary of Contents for 2011 Corvette

Reviews:

Chevrolet 2011 Corvette, Owner'S Manual, Page: 12 / 436

Search results

Summary of Contents for 2011 Corvette

Reviews: