Chevrolet 2011 Corvette, Owner'S Manual, Page: 128 / 436

Black plate (6,1)
Chevrolet Corvette Owner Manual - 2011
5-6 Instruments and Controls
Depending on the mirror, in order to
calibrate, CAL must be displayed in
the mirror compass windows. If CAL
is not displayed, press
P
for
several seconds or until CAL is
displayed.
If the compass has map lamps, it
can be placed in calibration mode
by pressing and holding the left map
light button until a C appears on the
compass display.
The mirror compass can be
calibrated by driving the vehicle in
circles at 8 km/h (5 mph) or less until
the display reads a direction.
Compass Variance
The mirror is set to zone eight.
If you do not live in zone eight or
drive out of the area, the compass
variance needs to be changed to
the appropriate zone.
To adjust for compass variance:
1. Find your current location and
variance zone number on the
zone map that follows.
2. Press and hold
P
until a Z and
a zone number displays. The
compass is now in zone mode.
3. Once the zone number displays,
press
P
repeatedly until you
reach the correct zone number.
Stop pressing
P
and the mirror
returns to normal operation.
Clock
To set the clock:
1. Press and hold H until the
correct hour displays.
2. Press and hold M until the
correct minute displays.
The clock mode automatically times
out with the changed display format
set as the current default setting.
Power Outlets
The accessory power outlet can be
used to plug in electrical equipment,
such as a cell phone or MP3 player.
The accessory power outlet is
located inside the center console
storage compartment, on the
forward left side.
Remove the cover to access and
replace when not in use.