Chevrolet 2011 Corvette Owner'S Manual Download Page 339

Page: 339 / 436

Black plate (49,1)

Chevrolet Corvette Owner Manual - 2011

Vehicle Care

10-49

Headlamps, Front Turn
Signal and Parking
Lamps

A. High-beam Headlamp

B. Low-beam Headlamp

C. Front Parking/Turn Signal

If the low-beam headlamp needs to
be replaced, see your dealer. See

High Intensity Discharge (HID)
Lighting on page 10

‑

for more

information.

To replace a high-beam or front
parking/turn signal bulb:

1. Turn the wheel to allow access

to the wheel well.

2. Remove the three outer

fasteners to move the access
panel back.

3. Remove the outer cover to

expose the high-beam headlamp
bulb socket.

4. Remove the headlamp bulb by

releasing the outer tabs from the
socket.

5. Remove the front parking/turn

signal bulb by turning the bulb
socket counterclockwise.

6. Replace the high-beam

headlamp bulb with a new bulb
and reattach to the bulb socket.

Replace the front parking/turn
signal bulb by turning the bulb
socket clockwise.

7. Reverse the Steps 2 through 4 to

reinstall.

Summary of Contents for 2011 Corvette





















































































































































































































































































































































































































































Search results

Summary of Contents for 2011 Corvette

Reviews:

Chevrolet 2011 Corvette, Owner'S Manual, Page: 339 / 436

Search results

Summary of Contents for 2011 Corvette

Reviews: