Casio fx-9860G AU PLUS User Manual Download Page 574

Page: 574 / 590

20050401

-1-3

Error Message Table

Meaning

Message

Countermeasure

No Variable

Com ERROR

Transmit
ERROR

Receive
ERROR

Memory Full

Time Out

Circular ERROR

Please
Reconnect

Too Many Data

Fragmentation
ERROR

Invalid Name

•

No variable specified within a
graph function being used for
Dynamic Graph.

•

No variable within a Solve
equation.

•

Problem with cable connection
or parameter setting during
program data communications.

•

Problem with cable connection
or parameter setting during data
communications.

•

Problem with cable connection
or parameter setting during data
communications.

•

Memory of receiving unit
became full during program
data communications.

•

A Solve calculation or integra-
tion calculation was unable to
satisfy convergence conditions.

•

There is a circular reference
(such as “=A1” in cell A1) in the
spreadsheet.

•

The connection was dropped
for some reason while updating
the operating system.

•

The number of data items is too
large.

•

Memory must be optimized
before any more data can be
stored.

•

The file name you input
includes invalid characters.

•

Specify a variable for the graph
function.

•

Input a Solve equation that
includes a variable.

•

Check to make sure there is
nothing wrong with the cable
connection, and that parameters
are configured correctly.

•

Check to make sure there is
nothing wrong with the cable
connection, and that parameters
are configured correctly.

•

Check to make sure there is
nothing wrong with the cable
connection, and that parameters
are configured correctly.

•

Delete some data stored in the
receiving unit and try again.

•

If you are performing a Solve
calculation, try changing to the
initial default estimated value.

•

If you are performing an
integration calculation, try
changing to a larger

tol

value.

•

Change cell contents to
remove the circular references.

•

Reconnect and try again.

•

Delete unneeded data.

•

Optimize memory.

•

Use the correct characters to
input a valid file name.

Summary of Contents for fx-9860G AU PLUS















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for fx-9860G AU PLUS

Reviews:

Related manuals for fx-9860G AU PLUS

Brands by name

Popular brands

Casio fx-9860G AU PLUS, User Manual

Search results

Summary of Contents for fx-9860G AU PLUS

Reviews:

Related manuals for fx-9860G AU PLUS

Brands by name

Popular brands