Casio fx-9860G AU PLUS User Manual Download Page 399

Page: 399 / 590

20050401

8-4-3

File Management

To delete all programs

1. While the program list is on the display, press

(DEL

•

A).

2. Press

(Yes) to delete all the programs in the list or

(No) to abort the operation

without deleting anything.

• You also can delete all programs by entering the

MEMORY

mode from the Main Menu, and

then pressing

(MAIN) to display the memory information screen.

See “12-7

MEMORY

Mode” for details.

Registering a password

When inputting a program, you can protect it with a password that limits access to the
program contents to those who know the password.

• You do not need to input the password to run a program.

○ ○ ○ ○ ○

Example

To create a program file under the name AREA and protect it with the
password CASIO

1. While the program list is on the display, press

(NEW) and input the file name of the

new program file.

(NEW)

AREA

2. Press

(

) and then input the password.

(

)

CASIO

# The password input procedure is identical to

that used for file name input.

Summary of Contents for fx-9860G AU PLUS















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for fx-9860G AU PLUS

Reviews:

Related manuals for fx-9860G AU PLUS

Brands by name

Popular brands

Casio fx-9860G AU PLUS, User Manual

Search results

Summary of Contents for fx-9860G AU PLUS

Reviews:

Related manuals for fx-9860G AU PLUS

Brands by name

Popular brands