6 - WORKING OPERATIONS
3. Install a clevis hook in the lift eye. Ensure the clevis
hook is certified to lift the weight of the load.
NOTICE:
Make sure that the clevis hook will not and
does not get caught in the linkage. Remove the clevis
hook when lifting is complete. Damage to the clevis
hook or the linkage can occur if the clevis hook is not
removed when digging.
4. Attach safety approved sling, cable, or chain to the
clevis hook.
5. Dump and lower the loader bucket to the ground.
6. Raise the front wheels off the ground so that both front
tires are about
25 - 50 mm
(
1 - 2 in
) above the ground.
Make sure the machine is level.
NOTE:
If the ground is soft, put a wide pad (wood
boards) under each stabilizer pad.
7. Lower both stabilizers and raise the machine so that
both rear tires are about
25 - 50 mm
(
1 - 2 in
) above
the ground. Make sure the machine is level.
LEEN11T0200AA
1
RAIL15TLB0534AA
2
8. If the machine is equipped with a telescopic dipper,
it is mandatory for it to be completely retracted and
mechanically locked.
LEEN11T0198AA
3
RAIL15TLB0546BA
4
6-42
Summary of Contents for 580ST
