Case 580ST, Operator'S Manual

Page: 29 / 434

2 - SAFETY INFORMATION
Instructional seat safety
Passengers are not permitted to ride on the machine.
The instructional seat is to be used only when training a
new operator or when a service technician is diagnosing
a problem.
When required for the purposes of training or diagnostics,
only one person may accompany the operator and that
person must be seated in the instructional seat.
When the instructional seat is occupied, the following
precautions must be followed:
• Machine should be driven only at slow speeds and over
level ground.
• Avoid driving on highways or public roads.
• Avoid quick starts or stops.
• Avoid sharp turns.
• Always wear correctly adjusted seat belts.
• Keep door closed at all times.
Operator presence system
Your machine is equipped with an operator presence sys-
tem to prevent the use of some features while the operator
is not in the operator’s seat.
Never disconnect or bypass the operator presence sys-
tem.
If the operator presence system is inoperable, then it must
be repaired.
Reflectors and warning lights
You must use flashing amber warning lights when you op-
erate equipment on public roads. Rotating beacons (op-
tional)
(1) should be placed on the roof.
MOLI12LBB0152AB
1
2-5