Case 580ST, Operator'S Manual

Page: 275 / 434

7 - MAINTENANCE
Front axle reduction gear oil level
1. In this case, slightly raise the front part of the machine
with the loader attachment, until the front wheels are no
longer in contact with the ground and place a suitable
support under the front axle.
2. Manually position the wheel until the hole of the plug
(1) is in horizontal position.
3. Unscrew and remove the plug (1) .
4. Check the level by checking if the oil reaches the height
of the plug hole.
5. If necessary, top up.
6. Retighten the plug (1) .
7. Repeat the same operations, previously described, for
the other reduction gear.
8. Lower the machine to the ground.
LEEN11T0384AA
4
Oil specification and capacities
Use CASE AKCELA TRANSAXLE FLUID 80W-140 (
MAT 3510 ) or an oil meeting the below standard:
•
SAE 80W-140
NOTE: T
UTELA
T
RANSAXLE FLUID
SAE 80W-140 can also
be used.
Capacities:
• 2WS (each):
1 L ( 0.26 US gal )
• 4WS (each):
1.3 L ( 0.34 US gal )
7-53