7 - MAINTENANCE
Bucket teeth - replacement
Loader bucket
1. Move the machine to a level and firm ground.
2. Position the loader bucket so that the bucket teeth can
be replaced.
3. Place the direction-of-travel lever and gearshift lever in
neutral position.
4. Immobilize the machine with the parking brake.
5. Stop the engine and remove the starter switch key.
6. Loosen and remove the screws
(2)
with the nuts
(3)
.
7. Extract the tooth
(1)
.
8. Clean the area around the tooth.
9. Assemble the new tooth
(1)
.
10. Screw in and tighten the screws
(2)
with the nuts
(3)
.
LEEN12T0502AA
1
Backhoe bucket
1. Move the machine to a level and firm ground.
2. Position the backhoe bucket so that the bucket teeth
can be replaced.
3. Place the direction-of-travel lever and gearshift lever in
neutral position.
4. Immobilize the machine with the parking brake.
5. Stop the engine and remove the starter switch key.
NOTICE:
Nobody must be in the trajectory of the tooth holder and of the tooth to be removed. During tooth removal,
both the tooth holder and the tooth could be unexpectedly projected, thus hitting persons standing in their trajectory
or nearby. Projected metal chips could hit persons and cause injury.
6. Remove the tooth holder
(2)
using a hammer and a
chisel.
7. Remove the tooth
(1)
from the tooth holder
(3)
.
8. Clean the inside of the tooth holder, removing any dirt
or rust.
9. Insert a new tooth
(1)
into the tooth holder
(3)
.
10. Lock the new tooth by installing the tooth holder
(2)
.
LEEN12T0504AA
2
7-134
Summary of Contents for 580ST
