Cardinal Health IVAC 571, Technical & Service Manual

Page: 72 / 104

IVAC® Volumetric Pump (Models 571 & 572) 72/104 1000SM00018 Issue 2
Spare Parts Replacement Procedures
Door Assembly
(continued)
Door Latch
Replacement Procedure
1. Drive out the groove pin using a pin punch.
2. Remove the two curved spring washers and the door latch.
3. Remove the magnet cover and magnet as required.
4. Reassemble in reverse order.
Spare Parts
Item Description Part Number
A PIN,GRV 0.125X1.25 S ALLOY 302053
B COVER,MAGNET 125337
C MAGNET,MAGNETIZED,CO 90C98A 302425
D ADHESIVE LOCTITE 496 0000ME00753
E ASSY LATCH,GNRC,(BOM) 132777
E ASSY,LATCH,ENG,(BOM) 132776 (with label)
F SPRING,CVR,WSHR U-138-0045S 301591
Refitting notes:
1) When refitting the magnet, ensure the south pole faces outwards, secure magnet in place using loctite and cover.
2) Fit the two curved spring washers into the latch recesses outwardly, convex.
3) Fit the groove pin flush with the outside surface of the door.
(
B
) Cover
(
A
) Groove pin
(
C/D
) Magnet / Loctite
( F ) Spring Washers (x2)
(
E
) Latch
See
Inside
View
Inside View
When refitting the
door latch, apply
lub grease 33
(0000ME00452) on
a cotton swab, to
entire length of slot
inside the latch.