IVAC® Volumetric Pump (Models 571 & 572)
5/104
1000SM00018 Issue 2
Introduction and Start Up
The IVAC® Volumetric Pump - Models 571 and 572 automatically regulates the infusion rate of IV solutions using a linear
peristaltic, volume displacement mechanism to regulate fluid flow at the prescribed rate. The pump can be operated with
a Flow Sensor and is compact and robust enough for most patient situations.
The IVAC® 571 Volumetric Pump operates in primary infusion mode only.
The IVAC® 572 Volumetric Pump has a primary and secondary infusion mode.
Product Familiarity
Ensure that you are fully familiar with the pump by carefully studying the
Directions for Use (DFU)
prior to operation and
prior to attempting any repairs or servicing. As part of continuous improvement, product enhancements and changes are
introduced from time to time.
Purpose of this Manual
This Technical Service Manual describes how to set up, test and maintain the following IVAC® Volumetric Pumps:
Model 571
Model 572
This manual is intended for use by personnel experienced in medical equipment testing and maintenance procedures .
Conventions Used in this Manual
BOLD
Used for Display messages/values, self-test codes, controls and indicators referenced in this manual, for
example,
CAL RATE
, test code
11, ON/OFF
switch.
'Single quotes'
Used to indicate cross-references made to another section of this manual. For example, see
Chapter 2, 'Configuration and Calibration'.
underline
Used to indicate a link to another section within this manual.
Italics
Used to refer to other documents or manuals. For example, refer to the relevant
Directions for Use
(DFU)
for further information. Also used for emphasis, for example, ...if the gap
still
measures less
than...
Wherever this symbol is shown a Hints & Tips note is found. These notes provide useful advice or
information that may help to perform the task more effectively.
Wherever this symbol is shown a Toolbox note is found. These notes highlight an aspect of test
or maintenance that is important to know about. A typical example is drawing attention to a
software upgrade that you should check has been installed.
Introduction
Summary of Contents for IVAC 571
