Canon TS6400 Series Online Manual Download Page 409

Page: 409 / 439

1000

Cause

Possible causes include the following.

• There is no paper in the rear tray.
• Paper is not loaded in the rear tray properly.

What to Do

Take the corresponding actions below.

• Load paper in the rear tray.

Loading Plain Paper / Photo Paper in Rear Tray

• Align the paper guides of the rear tray with both edges of the paper.

• Close the feed slot cover.

After carrying out the above measures, press the printer's

button to cancel the error.

Note

• To cancel printing, press the printer's

Stop

button.

409

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands

Canon TS6400 Series, Online Manual

Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands