manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 178

Other device settings

Select this setting item from 

Device settings

 in the menu screen which appears when you press the 

OK

button.

•

Key repeat

When you select 

ON

, numbers, characters and other choices can be displayed quickly by pressing the

holding the     button when you are entering the characters etc.

•

ECO settings

ECO settings

•

Quiet setting

Quiet setting

•

Original removal reminder

Selects whether the printer will display the reminder screen in case you forget to remove the original
from the platen after scanning.

Important

• Depending on the type of original or the state of the document cover, forgetting to remove the

original may not be detected.

•

Status bar settings

Change the display of the status bar.

◦

Advanced mode

Enables or disables the status bar display.

When 

Disable

 is selected, only the left end of the status bar will light up or flash.

◦

Brightness

Adjusts the brightness of the status bar.

•

Wi-Fi pairing settings

In order to connect Canon PRINT Inkjet/SELPHY, multiple configurations will be performed.

◦

Enable/disable pairing

Set the printer's Wi-Fi pairing function to enable or disable.

◦

Allow/block additional pairing

On another function permit or prohibit Canon PRINT Inkjet/SELPHY pairing.

◦

Delete paired devices

Cancel all Canon PRINT Inkjet/SELPHY pairing.

178

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands