Canon TS6400 Series Online Manual Download Page 282

Page: 282 / 439

Scanning Easily (Auto Scan)

Auto Scan allows for automatic detection of the type of the item placed on the platen.

Important

• The following types of items may not be scanned correctly. In that case, adjust the cropping frames

(scan areas) in whole image view of ScanGear (scanner driver), and then scan again.

Photos with a whitish background
Items printed on white paper, hand-written text, business cards, and other unclear items
Thin items
Thick items

Make sure scanner or printer is turned on.

Place items on platen.

Positioning Originals (Scanning from Computer)

Start IJ Scan Utility.

Click

Auto

Scanning starts.

Note

• To cancel the scan, click

Cancel

• Use the

Settings (Auto Scan)

dialog box to set where to save the scanned images and to make

advanced scan settings.

• To scan a specific item type, see the following pages.

Scanning Documents and Photos

Scanning with Favorite Settings

282

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands

Canon TS6400 Series, Online Manual

Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands