manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 120

Cleaning Paper Feed Rollers

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.

In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only
when necessary.

You need to prepare: three sheets of A4 or Letter-sized plain paper

1.

Check that printer is turned on.

2.

Press the 

OK

 button.

3.

Select 

Maintenance

.

4.

Select 

Roller cleaning

.

The confirmation screen will appear.

5.

Select 

Yes

.

6.

Select 

Rear tray

 or 

Cassette

 to clean the paper feed roller.

7.

Follow the message to remove any paper from the paper source.

If you clean the paper feed roller of cassette, remove any paper from the cassette, then push it back.

8.

Press the 

OK

 button.

The paper feed roller will rotate as it is cleaned without paper.

9.

Make sure that the paper feed roller has stopped rotating, then follow the message to load
the three sheets of A4 or Letter-sized plain paper.

Loading Plain Paper / Photo Paper in Rear Tray
Loading Plain Paper in Cassette

10.

Press the 

OK

 button.

120

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands