manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 154

4. Select 

Prevent paper abrasion

 and press the 

OK

 button (B).

5. Use     button (C) to change setting and press 

OK

 button (B).

Network Status Indication

When you press the 

OK

 button, icons depicting the Wi-Fi setting and the network status indicate by the

icon in the standby screen.

If the 

 icon appears on the LCD, it indicates that Wi-Fi is enabled and the printer is connected to the

wireless router.

Depending on the signal state, the icon will change.

Signal strength:

 81 % or more

You can use the printer over Wi-Fi without any problems.

Signal strength:

 51 % or more

The problem such as the printer cannot print may occur according to the network status. We recom-
mend placing the printer near the wireless router.

154

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands