manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 215

Expanding the Range of the Document to Print

Setting a large amount of extension allows you to perform borderless printing with no problems. However,
the portion of the document extending off the paper range will not be printed and for this reason, the
subjects around the perimeter of a photo may not be printed.

When you are not satisfied with the result of borderless printing, reduce the amount of extension. The
extension amount decreases as the 

Amount of Extension

 slider is moved to the left.

Important

• When the amount of extension is decreased, an unexpected margin may be produced on the print,

depending on the size of the paper.

Note

• When the 

Amount of Extension

 slider is set to the leftmost position, image data will be printed in the

full size. If you set this when printing the address side of a postcard, the postal code of the sender is
printed in the correct position.

• When 

Preview before printing

 is checked on the 

Main

 tab, you can confirm whether there will be no

margin before printing.

215

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands