manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 83

8.

Mount cassette cover (B) and insert cassette into printer.

Push the cassette into the printer until it stops.

9.

Pull out the paper output tray (J) and open the paper output support (K).

Note

• To prevent incorrect printing, this printer has a function that detects whether the settings for the paper

loaded in the cassette matches the paper settings. Before printing, make print settings in accordance
with the paper settings. When this function is enabled, an error message is displayed if these settings
do not match to prevent incorrect printing. When this error message is displayed, check and correct the
paper settings.

• When the cassette is pulled out, it automatically extends. To shorten the extended cassette, push it in

while pulling lever (L).

83

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands