manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 212

•

Print from Last Page

:   /

Collate

: 

•

Print from Last Page

:   /

Collate

: 

4.

Click 

OK

When you perform print, the specified number of copies will be printed with the specified printing order.

Important

• When the application software that you used to create the document has the same function, specify the

settings on the printer driver. However, if the print results are not acceptable, specify the function
settings on the application software. When you specify the number of copies and the printing order with
both the application software and this printer driver, the number of copies may be multiplied numbers of
the two settings or the specified printing order may not be enabled.

•

Print from Last Page

 appears grayed out and is unavailable when 

Tiling/Poster

 is selected for 

Page

Layout

.

• When 

Booklet

 is selected for 

Page Layout

, 

Print from Last Page

 and 

Collate

 appear grayed out and

cannot be set.

• When 

Duplex Printing

 is selected, 

Print from Last Page

 appears grayed out and cannot be set.

Note

• By setting both 

Print from Last Page

 and 

Collate

, you can perform printing so that papers are collated

one by one starting from the last page.
These settings can be used in combination with 

Normal-size

, 

Borderless

, 

Fit-to-Page

, 

Scaled

, and

Page Layout

.

212

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands