manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 45

Connecting with Wireless Direct

You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below.

• Wireless connection (connecting devices via a wireless router)

• Direct wireless connection (connecting devices directly without a wireless router)

This section describes Wireless Direct, which allows you to print by connecting the devices to the printer
directly.

Follow the procedure below to set up and use Wireless Direct.

1. Preparing the printer.

Changing Printer Setting to Use Wireless Direct

2. Preparing a device to connect to the printer.

Connecting a smartphone/tablet/computer to the printer

Important

• You can connect up to 5 devices to the printer at the same time with Wireless Direct.

• Check the usage restrictions and switch the printer to the Wireless Direct.

Restrictions

Changing Printer Setting to Use Wireless Direct

1.

Make sure the printer is turned on.

2.

Press the 

OK

 button on HOME screen.

3.

Select 

Device settings

 and press the 

OK

 button.

4.

Select 

LAN settings

 and press the 

OK

 button.

5.

Select 

Wireless Direct

 and press the 

OK

 button.

6.

Select 

Advanced mode

 and press the 

OK

 button.

7.

Check displayed message, select 

Next

 and press the 

OK

 button.

8.

Select 

ON

 and press the 

OK

 button.

The Wireless Direct is enabled and a device can be connected to the printer wirelessly.

Note

• To show the password, select 

ON

. To hide the password, select 

OFF

.

45

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands