Canon TS6400 Series Online Manual Download Page 82

Page: 82 / 439

If the paper stack is in contact with the protrusion (G), the paper may not be fed properly.

Slide front paper guide (C) to align it with paper stack.

Align paper guide with where it clicks into place.

Slide right paper guide (D) to align it with paper stack.

Do not slide the paper guide too hard against the paper. The paper may not be fed properly.

Note

• Do not load sheets of paper higher than the load limit mark (H).

• Keep the paper stack height below the tabs (I) of the paper guides.

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands

Canon TS6400 Series, Online Manual

Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands