manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 88

8.

If page size and media type shown on LCD match size and type of envelopes loaded in rear
tray, select 

OK

.

If not, select 

Change

 to change the settings in accordance with the size and type of the loaded

envelopes.

9.

Pull out the paper output tray (F) and open the paper output support (G).

Note

• To prevent incorrect printing, this printer has a function that detects whether the settings for the paper

loaded on the rear tray matches the paper settings. Before printing, make print settings in accordance
with the paper settings. When this function is enabled, an error message is displayed if these settings
do not match to prevent incorrect printing. When this error message is displayed, check and correct the
paper settings.

88

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands