Canon TS6400 Series Online Manual Download Page 410

Page: 410 / 439

1003

Cause

Possible causes include the following.

• There is no paper in the cassette.
• Paper is not loaded in the cassette properly.

What to Do

Take the corresponding actions below.

• Load paper in the cassette.

Loading Plain Paper in Cassette

Note

• The loadable paper differs depending on the paper source. The loadable paper in the cassette is

A4, Letter, A5, or B5 size plain paper.

• Align the paper guides of the cassette with the edges of the paper.

After carrying out the above measures, press the printer's

button to cancel the error.

Note

• To cancel printing, press the printer's

Stop

button.

• When the jammed paper is removed from the rear side of the printer, the transport unit cover may not

be installed correctly. Refer to the following page.

Removing Jammed Paper from Rear Side

No Paper in Cassette during Printer Setup

Load two or more sheets of A4 or Letter size plain paper in the cassette.

410

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands

Canon TS6400 Series, Online Manual

Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands