Canon TS6400 Series Online Manual Download Page 148

Page: 148 / 439

Checking that Power Is On

A screen appears in the LCD when the printer is turned on.

Even if the display in the LCD is off, if the status bar is lit, the printer is on.

Note

• It may take a while for the printer to start printing immediately after you turn on the printer.

• The display in the LCD will turn off if the printer is not operated for about 10 minutes.

To restore the display, either press a button on the operation panel or perform a print operation.

148

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands

Canon TS6400 Series, Online Manual

Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands