Canon TS6400 Series Online Manual Download Page 363

Page: 363 / 439

Refer to the instruction manual supplied with the paper for detailed information on the printable side.

•

When copying, see also the sections below:

Check6

Is platen glass dirty?

Clean the platen glass.

Cleaning Platen and Document Cover

Check7

Make sure original is properly loaded on platen.

When you load the original on the platen, load it with the side to be copied facing down.

Loading Originals

Check8

Is copy source a printed paper by printer?

If you use a printout done by this printer as the original, print quality may be reduced depending on the condition
of the original.

Print from the printer directly, or reprint from the computer if you can reprint from it.

363

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands

Canon TS6400 Series, Online Manual

Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands