manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 75

Loading Plain Paper / Photo Paper in Rear Tray

You can load plain paper or photo paper.

You can also load envelopes on the rear tray.

Loading Envelopes in Rear Tray

Important

• If you cut plain paper to a size of 5" x 7" (13 x 18 cm) or smaller to perform a trial print, it may cause a

paper jam.

Note

• We recommend Canon genuine photo paper for printing photos.

For details on the Canon genuine paper, see 

Supported Media Types

.

• You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour

Paper SAT213.

For the page size and paper weight you can use for this printer, see 

Supported Media Types

.

1.

Prepare paper.

Align the edges of paper. If paper is curled, flatten it.

Note

• Align the edges of paper neatly before loading. Loading paper without aligning the edges may

cause paper jams.

• If paper is curled, hold the curled corners and gently bend them in the opposite direction until the

paper becomes completely flat.

For details on how to flatten curled paper, see 

Check3

 in 

Paper Is Smudged / Printed Surface Is

Scratched

.

• When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at a

time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the paper
and reduce the print quality.

2.

Open rear tray cover (A). Pull straight up and fold back paper support (B).

75

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands