manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 186

Quiet setting

Enables this function on the printer if you want to reduce the operating noise, such as when printing at night.

Follow the procedure below to perform setting.

1.

Check that printer is turned on.

2.

Press the 

OK

 button.

3.

Select 

Device settings

.

4.

Select 

Other device settings

.

5.

Select 

Quiet setting

.

6.

Select to turn it ON/OFF.

When 

Quiet setting

 is turned on, it is possible to reduce the operating noise while printing is in progress.

Important

• When 

Quiet setting

 is turned on, the operating speed will be slower compared to when it is turned off.

• This function may not be so effective depending on the printer's setting. Furthermore, certain noise,

such as when the printer is preparing for printing, is not reduced.

Note

• You can set the quiet mode from the operation panel of the printer or the printer driver. No matter how

you set the quiet mode, the mode is applied when you perform operations from the operation panel of
the printer or printing and scanning from the computer.

• For Windows, you can set the quiet mode from ScanGear (scanner driver).

186

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands