Canon PowerShot G3, Service Manual

Page: 77 / 185

3-5
CHAPTER 3. REPAIR INSTRUCTION
Fig. 3-5 REAR COVER UNIT
REAR COVER
UNIT
LCD BUSH
SELECTOR
SPRING
CF COVER
EVF UNIT
(1)-1
(1)-2
(1)-3
(1)-4
(1)-6
(1)-5
(1)-1
e
e
f
4.0mm
4.5mm
CD1-4853-000 CD1-4854-000
DARK SILVER
M1.7
SILVER
M1.7
f
e
CAUTION
Be careful not to drop the
SELECTOR SPRING.
Diopter adjustment dial
FINDER UNIT
REAR COVER UNIT
When installing the main body and the REAR COVER UNIT do as follows.
Install them after each diopter adjustment dial of the FINDER UNIT and the
REAR COVER UNIT are aligned to the angles specified as shown in the
illustration.
.
NOTE (Assembling)
A
Rotate the diopter adjustment dial in the direction
of mark
A
as far as it can go. When it reaches
the deep end, return it slightly.
Rotate the diopter adjustment dial
as far as it can go.
2.2.2 REAR COVER UNIT
(1) REAR COVER UNIT
1. Remove the three screws of
e
.
2. Remove the screw of
f
.
3. Open the CF COVER.
4. Open the EVF UNIT.
5. Remove the REAR COVER UNIT from the main body.
6. Remove the SELECTOR SPRING from REAR COVER UNIT.
CAUTION
Be careful not to drop the SELECTOR SPRING.
NOTE (Assembling)
When installing the main body and the REAR COVER UNIT do as follows. Install them after each
diopter adjustment dial of the FINDER UNIT and the REAR COVER UNIT are aligned to the angles
specified as shown in the illustration.