Canon PowerShot G3, Service Manual

Page: 110 / 185

3-38
CHAPTER 3. REPAIR INSTRUCTION
3.3.4 Starting up the Adjustment Software
After completing the preparatory steps, click Start and move the cursor to Program; then select Canon
Digital Camera and click PowerShot G3 Adjustment.
3.3.5 Menu Window
When the Adjustment Software starts up, the Menu Window below will appear.
3.3.6 How to Use the Adjustment Software
■
Calibration/Adjustment
For starting, click the button related with adjustment.
* Whenever you use your light source for the adjustment for the first time, be sure to click the “Cali-
bration” Button.
■
Quitting the Adjustment Software
Click the “Exit” button.
■
Saving or Loading data
• “Save” button : This button saves all adjustment data stored on the camera in text format.
• “Load” button : This button loads all adjustment data saved in text format to the camera.
■
Notes
• If the adjustment fails, a message indicating the failure will appear on each product. If this happens,
do the adjustment again.
• The Adjustment Software is dedicated only to Canon Digital Camera PowerShot G3.
Never use it for any other camera.
• The Windows98 or 2000 must be pre-installed on the computer that is equipped with the USB termi-
nal. (Windows95 does not support the USB.)
* The operation with the Windows XP, etc. is not guaranteed.