manualshive.com logo in svg

Canon PowerShot G3, Service Manual

Share
Download
Canon PowerShot G3 Service Manual Download Page 33

1-27

 PhotoRecord 1.6 (Win) for easy layout and printing of clear pictures

Adds support for Exif 2.2 to previous version

 PhotoStitch 3.1 for creating precise panoramic pictures

Unchanged from previous version in terms of usability

 RemoteCapture 2.6 for image captures and image transfers controlled from computer

The following are the changes from the previous version:
1) Moved to software without device information to support new firmware and new SDKs
       Abandoned device-specific recording windows and made one window for all devices
2) Added specifications
       Enhanced manual setting items (M, Av, Tv, AE selection, flash strength setting, flash exposure
       compensation setting)

 TWAIN Driver 5.0/WIA Driver 5.0 (Win)

Function limited to importing JPEG images

 USB Mounter 1.8 (Mac, however only supports OS 9.0 to OS 9.2)

Unchanged from previous version in terms of usability

 Apple QuickTime 5.0 (Win)

Unchanged from previous version in terms of usability

 CP-10/100 PrinterDriver 2.1

Adds support for CP-100 from this release on

 Adobe Acrobat Reader 4.0

Bundled for use with printer driver PDF manuals

Figure 2–19 Parameter setup window

in RemoteCapture

Figure 2–20  Main RemoteCapture screen

Summary of Contents for PowerShot G3


























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands