Canon MX720 Series Online Manual Download Page 194

Page: 194 / 248

When this menu is selected, the instruction screen is displayed if one or more ports are
unavailable for printing.

Settings

Configuration...

Displays the

Configuration

screen to configure settings of the selected printer.

Configuration Screen

Note

This item has the same function as

Configuration...

in the

Canon IJ Network Tool

screen.

Associate Port...

Displays the

Associate Port

screen and you can associate a port with the printer.

Associate Port Screen

This menu is available when

No Driver

is displayed for the selected printer. Associating a port

with the printer enables you to use it.

Maintenance...

Displays the

Maintenance

screen to revert the network settings of the printer to factory default

and to mount the card slot as the network drive.

Maintenance Screen

Help

Instructions

Displays this guide.

About

Displays the version of IJ Network Tool.

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 194 / 248

Search results

Summary of Contents for MX720 Series

Reviews: