Canon MX720 Series Online Manual Download Page 112

Page: 112 / 248

Important

Do not open the ink cover while printing is in progress.

(6)

When the message "

Did the patterns print correctly?

" appears, confirm that

the pattern is printed correctly, select

Yes

, then press the

button.

The input screen for the head position adjustment values will appear.

Look at the first pattern and adjust the print head position.

(1)

Check the printed patterns, and use the button to input the number of the

pattern in column A that has the least noticeable vertical streaks.

Note

If it is difficult to pick the best pattern, pick the setting that produces the least noticeable

vertical streaks.

(A)

Least noticeable vertical streaks

(B)

Most noticeable vertical streaks

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 112 / 248

Search results

Summary of Contents for MX720 Series

Reviews: