Canon MX720 Series Online Manual Download Page 122

Page: 122 / 248

When you have entered all the necessary values, click

Note

If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical

streaks.

(A) Least noticeable vertical streaks
(B) Most noticeable vertical streaks

If it is difficult to pick the best pattern, pick the setting that produces the least noticeable

horizontal streaks.

(A) Least noticeable horizontal streaks
(B) Most noticeable horizontal streaks

Confirm the displayed message and click

The second pattern is printed.

Important

Do not open the ink cover while printing is in progress.

10.

Check the printed pattern

Enter the numbers of the patterns with the least amount of streaks in the associated boxes.
Even if the patterns with the least amount of streaks are clicked in the preview window, their numbers
are automatically entered in the associated boxes.

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 122 / 248

Search results

Summary of Contents for MX720 Series

Reviews: