Canon MX720 Series Online Manual Download Page 110

Page: 110 / 248

The confirmation screen will appear.

(5)

Select

Yes

, then press the

button.

The print head alignment sheet will be printed and the print head position will be adjusted
automatically.
This takes about 4 minutes.

Important

Do not open the ink cover while printing is in progress.

Note

If the automatic adjustment of the print head position has failed, the error message appears

on the LCD.

A Message Is Displayed

(6)

When the completion message appears, press the

button.

The screen will return to the

Maintenance

screen.

Note

To access other available functions, use the mode buttons or the

MENU

button.

If the print results are still not satisfactory after adjusting the print head position as described above,

adjust the print head position manually.
From the machine

Aligning the Print Head Manually

From the computer

Aligning the Print Head Position Manually from Your Computer

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 110 / 248

Search results

Summary of Contents for MX720 Series

Reviews: